My Hope For This Blog
About Me
My Hope For This Blog

The ability to differentiate between home repairs and improvements that you can make yourself and those that will require the help of a contractor is a very important skill to have. Not only will this skill prevent you from spending more money than you need to on professional services, but it will also help you to avoid costly mistakes by attempting DIY projects that are out of your league. It is my hope that this information contained in this blog will help you to obtain this skill. More importantly, it is my hope that once you have identified a project you wish to take on, this information in this blog will help you to get the job done.

My Hope For This Blog

Call The Pro Plumber Or DIY? A Quick Guide For Homeowners

Ross Stewart

Most homeowners will try to tackle just about anything on their own just once. The only problem with this when it comes to plumbing problems is the fact that some tasks look simple on the surface but end up being way more complicated than a homeowner expects. Before you grab your monkey wrench, plumber's tape, and flashlight to get started on that plumbing project at your home, it is a good idea to get to know some of the things that are and are not safe for you to do on your own. Here is a quick look at a few examples of plumbing tasks you can safely do on your own and those not-so-easy ones that truly should require a professional plumber. 

DIY: Installing a new shower head. 

Screw off the old shower head and slip on the new one. It's as simple as that. This plumbing task is so easy that pretty much anyone in the house can do it. As long as you are keeping with the same basic shower head design, there should be no issues. 

Call a Plumber: Installing a new rainfall shower head. 

Overhead rainfall shower heads are all the rage in modern homes and look easy enough to install. However, installing this shower head will usually require rerouting of the main shower spout to a higher location, which can get pretty complicated. 

DIY: Unclogging a drain line close to the entry point of the drain. 

Whether it is a clog in your sink or your washing machine drainage line, if the clog is close to the initial point of exit, there is usually no hassle in using a plumber's snake or other tool to reach into the drain and pull out the problem. 

Call a Plumber: Unclogging a drain where the clog is far into the line. 

This task can get really tricky because the inner drain lines can have many twists and turns before leading to the final destination. In some cases, it is necessary for a plumber to use video drain inspection equipment just to track down the clog and determine the best way to go about fixing the issue. 

DIY: Changing the heating elements in your hot water heater. 

Unscrew a few fasteners, remove the old heating elements, and slide the new ones in place. This is a simple project that only requires a screwdriver and the new parts. 

Call a Plumber: Installing a new hot water heater. 

Anytime you are having a new hot water heater installed, it is best to enlist the aid of a plumber. This task involves making new electrical connections, tapping into existing water lines, and a lot of heavy lifting. 

To learn more, visit a website like http://www.bishopplumbing.com


Share